Language
I believe everyone has already known the advantages of air source heat pump. It can not only be used for heating, but also for cooling like air conditioning, and can also provide us with domestic hot water. Especially in terms of heating, it also supports floor heating, radiators and fan coils and other heating terminals. For this reason, many customers come to consult about air source heat pump floor heating. How about it? Let us introduce to you in detail whether air source floor heating is easy to use.
In simple terms, the air source heat pump floor heating system uses a main unit of an air source heat pump to drive the compressor with very little electric energy in winter, absorb a large amount of low-temperature heat energy in the air and convert it into high-temperature heat energy, produce hot water not exceeding 55 degrees, and circulate as a heat medium in the special pipeline for floor heating, heating the floor decoration layer, and warming the ground through ground radiation and convection heat transfer. In summer, the main unit changes to air conditioning mode, produces cooling water that meets the conditional temperature, and the cooling water passes through the circulation system to exchange heat in the fan coil to blow out the cold air.
Air source heat pumps can support dual-purpose use at the same time, serving as a cold source for air conditioning in summer and a heat source for floor heating systems in winter. Compared with traditional air conditioning and heating methods, it does not require gas consumption, is clean and pollution-free, and users do not need to purchase additional cooling and heating equipment, completing home heating and cooling decoration with minimal cost.
The principle of air source heat pump heating is to absorb a large amount of low-temperature heat energy in the air, convert it into high-temperature heat energy through compression by the compressor, and transfer the heat to water during the heating process. Even in a low-temperature environment, the heat is transmitted to the room through hot water or hot air circulation. The entire system consumes only a very small amount of electricity to drive the compressor to operate and absorb free heat in the air. Theoretically, at an average temperature of -5°C, every 1 kWh of electricity consumed can generate more than 3 kWh of heat, and the energy-saving benefits are far higher than traditional electric auxiliary heating and other forms. Air source heat pumps have a wide adaptability. In theory, they can be used in environments above -35°C, and they still have certain energy-saving properties.
Air source heat pump central air conditioner is also known as water machine, water system central air conditioner. Many customers who don't know much about it may wonder if it will leak during operation? The operation of water system air conditioner belongs to low-pressure water circulation, and the operating pressure is less than 1.8Mpa. The standard installation process is to pressure test the pipeline after the concealed project is completed, and do a good job of pressure maintenance to detect the airtightness of the system, and long-term pressure test until the decoration is completed. Long-term pressure test is enough to test the stability of our pipeline.
Central air conditioner needs to be installed in a concealed manner. Insulation devices must be added when installing the pipeline. The installation is difficult and requires a professional construction team to operate. The installation process is guaranteed. The system installed by a professional and reliable company will not have the risk of water leakage. However, the air source heat pump system is carried out simultaneously with home decoration. Be careful to avoid damaging the pipe insulation of the air conditioner during other indoor decoration.
Compared with the fluorine system central air conditioner, the water system has a softer air outlet and higher comfort. The comfort of the water system is because the water temperature can be controlled, and the specific heat capacity of water is the largest. The temperature difference during the heat exchange process is only about 5 degrees. In this way, not only the cold wind blown out by the fan coil is soft, but also there is less condensed water in the room, the temperature difference is smaller during the gas-liquid conversion, and the comfort is higher.
The above is our detailed introduction to the air source heat pump floor heating system. Do you think the air source heat pump floor heating system is easy to use?
Skype
